Getting Printer Information Over The Network; Current Printer Status - Ricoh SP C400DN User Manual

Getting Printer Information over the Network

This section explains details of each item displayed in the printer status and in-
formation.

Current Printer Status

The printer status can be checked using the following commands:
• UNIX: Use the "lpq" command and "rsh", "rcp", "ftp" and "sftp" parameters.
• mshell: Use the "status" command.
Messages
Access Restricted
Add staples (Booklet: Back)
Add staples (Booklet: Both)
Add staples (Booklet: Front)
Adjusting...
Call Service Center
Canceled
Canceling Job...
Key Card/Counter not inserted
Coin or amount not inserted
Coin/Key Counter not inserted
Configuring...
Paper Misfeed: ADF
Cover Open: Duplex Unit
Cover Open: Finisher
Cover Open: Front
Cover Open: Front/Left
Cover Open: Top
Data Size Error
Empty: Black Toner
Empty: Cyan Toner
Empty: Magenta Toner
Empty: Yellow Toner
Energy Saver Mode
Error
Error at Printer: Red LED
Getting Printer Information over the Network
Description
The job was canceled because user have no authority.
The staple of booklet finisher (back) is exhausted.
The staple of booklet finisher is exhausted.
The staple of booklet finisher (front) is exhausted.
The printer is initializing or calibrating.
There is a malfunction in the printer.
The job is reset.
The job is being reset.
The printer is waiting for prepaid card or key.
The printer is waiting for coin to be inserted.
The printer is waiting for coin or key counter.
Setting is being changed.
The document feeder is open.
The cover of the duplex unit is open.
The cover of Finisher is open.
The front cover is open.
The front cover or left cover is open.
The top cover is open.
The data size error occurred.
The black toner cartridge is almost empty.
The cyan toner cartridge is almost empty.
The magenta toner cartridge is almost empty.
The yellow toner cartridge is almost empty.
The printer is in Energy Saver Mode.
An error has occurred.
An error has occurred.
6
253