Installing The Postscript 3 Printer Driver (Windows 2000) - Ricoh SP C400DN User Manual

Preparing for Printing

Installing the PostScript 3 Printer Driver (Windows 2000)

Important
1 ❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the
SmartDeviceMonitor port.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Create a new port:].
H
Click [Standard TCP/IP Port], and then click [Next >].
I
Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
J
Enter the printer name or IPv4 address in the [Printer Name or IPv4 Address]
box, and then click [Next >].
When screen for Device selection appears, select "RICOH NetworkPrinter
Driver C Model".
K
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
L
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
M
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
N
Click [Next >].
O
Specify whether or not to print a test page, and then click [Next>].
P
Click [Finish].
The printer driver installation starts.
32