Ricoh SP C400DN User Manual page 251

L
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
M
Click [OK].
N
Check that the name of the printer driver you want to install is selected, and
then click [Next >].
O
Change the name of the printer if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
P
Specify whether or not to print a test page, and then click [Next >].
Q
Click [Finish].
The printer driver installation starts.
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
❒ A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.
Using the SmartDeviceMonitor Port
1
27