Ricoh SP C400DN User Manual page 135

D
Remove the photo conductor unit you want to replace. Turn the green lever
counterclockwise to unlock the unit. (The black photo conductor unit is
used in this example.)
E
Pull out the ring pull handle of the photo conductor unit.
F
Hook your finger through the ring pull handle, and then slowly pull out
the photo conductor unit. When you have pulled the unit half way out, sup-
port the photo conductor unit using your other hand, and then pull the unit
completely out.
• Do not hold any protruding areas of the photo conductor unit. Doing so
may break the photo conductor unit.
• Do not touch any protruding areas of the photo conductor unit. These may
stain your hands or clothes.
AET138S
AET139S
AET140S
Replacing the Photo Conductor Unit
6
113