Installing Options; Available Options; Option List - Ricoh SP C400DN User Manual

Hide thumbs Also See for SP C400DN:

Table of Contents

This section describes how to install options.

By installing options, you can improve the printer performance and have an ex-

panded variety of features to use. For the specifications of each option, see p.182

"Specifications".

• Before installing options, the machine should be turned off and unplugged

for at least an hour. Components inside the machine become very hot, and

can cause a burn if touched.

• Before moving the machine, unplug the power cable from the outlet. If the

cable is unplugged abruptly, it could become damaged. Damaged plugs or

cables can cause an electrical or fire hazard.

• When lifting the machine, use the grips on both sides. The machine could

break or cause an injury if dropped.

❒ The voltage rating of the connector for options is 24 V DC or less.

The following is a list of options for this printer.

• Paper Feed Unit Type 4000

• Hard Disk Drive Type 4000

• Memory Unit Type D 128MB

• Memory Unit Type E 256MB

• User Account Enhance Unit Type E

• IEEE 802.11b Interface Unit

• IEEE 1284 Interface Board Type A

• USB Host Interface Board Type A

• Gigabit Ethernet Board Type A

• Camera Direct Print Card Type B

• Data Overwrite Security Unit Type E

• VM Card Type D

• Data Storage Card Type A

2. Installing Options

Show Quick Links

Table of Contents