Option Installation Flow Chart - Ricoh SP C400DN User Manual

Installing Options

Option Installation Flow Chart

Installing multiple options in the following order is recommended:
A
Attach the paper feed unit (Paper Feed Unit Type 4000).
Attach the paper feed units to the bottom of the printer.
You can attach up to two paper feed units. Up to 1750 sheets of paper can be
2
loaded in total.
B
Install the SDRAM module (Memory Unit Type D 128MB, Memory Unit
Type E 256MB).
Install the module to the SDRAM module slot on the controller board.
There are two types of memory unit: 128 MB and 256 MB.
C
Install User Account Enhance Unit (User Account Enhance Unit Type E).
Install the module to the User Account Enhance Unit slot of the controller
board.
D
Install the hard disk drive (Hard Disk Drive Type 4000).
Install the hard disk drive to the controller board.
E
Install the IEEE 1284 interface board, IEEE 802.11b interface unit, USB host
interface board, or Gigabit Ethernet board.
Install the IEEE 1284 interface board, IEEE 802.11b interface unit, USB host in-
terface board, or Gigabit Ethernet board on the controller board.
Up to two of the followings can be installed:
• IEEE 1284 Interface Board Type A
• IEEE 802.11b Interface Unit
• USB Host Interface Board Type A
• Gigabit Ethernet Board Type A
F
Install the security unit (Data Overwrite Security Unit Type E, Data Storage
Card Type A), the Camera Direct Print card (Camera Direct Print Card Type
B), or the VM card (VM Card Type D).
Insert these units into the expansion card slot on the controller board.
16