Ricoh SP C400DN User Manual page 474

Monitoring and Configuring the Printer
eap {tls|ttls|leap|peap} {chap|msc-
hap|mschapv2|pap|md5|tls}
username "character string"
username2 "character string"
6
domain "character string"
password "character string"
srvcert {on|off}
imca {on|off}
srvid "character string"
250
Parameter Value configured
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are set-
tings for the phase 2 method, and must be set when
using EAP-TTLS or PEAP.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap, msc-
hap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or tls.
You can specify the login user name for the Radius
server.
Usable characters: ASCII 0x20-0x7e(31 bytes) other
than "@". The default is blank.
You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes) oth-
er than "@". The default is blank.
You can specify the login domain name for the Ra-
dius server.
Usable characters: ASCII0x20-0x7e (31 bytes) other
than "@". The default is blank.
You can specify the login password for the Radius
server.
Usable characters: ASCII 0x20-0x7e(128 bytes).
The default is blank.
You can set the server certificate. The default is
"off".
You can enable or disable the certificate when the
intermediate certificate authority is present. The
default is "off".
You can set the server ID and subdomain of the
certificate server.