Ricoh SP C400DN User Manual page 149

D
Turn the paper tray right way up, and remove the friction pad from the tray.
The friction pad spring may come loose. Be careful not to lose the friction pad
spring.
E
Insert the new friction pad in the paper tray.
Place the spring over the central prong of the new friction pad and align the
friction pad with the grooves of the paper tray. Then push down friction pad
(as shown in the illustration), until it clicks.
After pushing down the friction pad, check it is properly installed by pressing
it lightly. If it is properly installed, it will spring back up.
F
Follow the same procedure to replace optional Paper Feed Unit friction
pads.
AET200S
AET201S
Replacing the Maintenance Kit
6
127