4.5.2 SIP Settings [Line 1]–[Line x]
Configuration File Reference
Authentication Password
Description
Value Range
Default Value
Configuration File Reference
4.5.2.7 DNS
Enable DNS SRV lookup
Description
Value Range
Default Value
Configuration File Reference
SRV lookup Prefix for UDP
Description
Value Range
Default Value
Configuration File Reference
110
Administrator Guide
SIP_AUTHID_n (Page 248)
Specifies the authentication password used to access the SIP server.
Max. 127 characters (except ", &, ', :, <, >, and space)
Not stored.
SIP_PASS_n (Page 249)
Selects whether to request the DNS server to translate domain names
into IP addresses using the SRV record.
•
Yes
•
No
Note
•
If you select [Yes], the unit will perform a DNS SRV lookup for
a SIP registrar server, SIP proxy server, SIP outbound proxy
server, or SIP presence server. If you select [No], the unit will
not perform a DNS SRV lookup for a SIP registrar server, SIP
proxy server, SIP outbound proxy server, or SIP presence
server.
Yes
SIP_DNSSRV_ENA_n (Page 255)
Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using UDP.
Note
•
This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Max. 32 characters
_sip._udp.
SIP_UDP_SRV_PREFIX_n (Page 256)
Document Version 2013-03