4.3.2 Ethernet Port Settings
IP Phone (Priority)
Description
Value Range
Default Value
PC (VLAN ID) (KX-UT123/KX-UT133/KX-UT136/KX-UT248 only)
Description
Value Range
Default Value
Configuration File Reference
PC (Priority) (KX-UT123/KX-UT133/KX-UT136/KX-UT248 only)
Description
Value Range
Default Value
Configuration File Reference
4.3.2.3 VLAN Settings
Enable VLAN
Description
Value Range
Default Value
Configuration File Reference
84
Administrator Guide
Indicates the priority value of the phone using LLDP (reference only).
0–7
Not applicable.
Specifies the VLAN ID of the PC when the LLDP feature is enabled.
0–4094
0
LLDP_VLAN_ID_PC (Page 204)
Specifies the priority number of the PC when the LLDP feature is
enabled.
0–7
0
LLDP_VLAN_PRI_PC (Page 205)
Selects whether to use the VLAN feature to perform VoIP
communication securely.
Note
•
You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE8021X".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "IEEE8021X" > "VLAN"
> "LLDP". Therefore, if "Yes" is specified for both "VLAN" and
"LLDP", the VLAN-related settings are used.
•
Yes
•
No
No
VLAN_ENABLE (Page 196)
Document Version 2013-03