Http User Agent; Authentication Id; Authentication Password - Panasonic KX-HDV230 Administrator's Manual

4.3.3 HTTP Client Settings
Value Range
Default Value
Configuration File Reference

HTTP User Agent

Description
Value Range
Default Value
Configuration File Reference

Authentication ID

Description
Value Range
Default Value
Configuration File Reference

Authentication Password

Description
Value Range
Default Value
Configuration File Reference
86 Administrator Guide
•
HTTP/1.0
•
HTTP/1.1
Note
•
For this unit, it is strongly recommended that you select [HTTP/
1.0]. However, if the HTTP server does not function well with
HTTP/1.0, try changing the setting [HTTP/1.1].
HTTP/1.0
HTTP_VER (Page 200)
Specifies the text string to send as the user agent in the header of HTTP
requests.
Max. 64 characters
Note
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT (Page 200)
Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Max. 128 characters
Not stored.
HTTP_AUTH_ID (Page 201)
Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Max. 128 characters
Not stored.
HTTP_AUTH_PASS (Page 201)
Document Version 2015-07