5.4.4 IEEE 802.1X Settings (KX-UT248 only)
5.4.4 IEEE 802.1X Settings (KX-UT248 only)
IEEE8021X_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
IEEE8021X_AUTH_PRTCL
Value Format
Description
Value Range
Default Value
Web User Interface Reference
IEEE8021X_USER_ID
Value Format
198
Administrator Guide
Boolean
Selects whether to use the IEEE 802.1X protocol.
Note
•
This setting is available only when "NW_SETTING_ENABLE" is
set to "N".
•
You should specify "Y" for only one of "LLDP_ENABLE",
"VLAN_ENABLE", or "IEEE8021X_ENABLE".
If "Y" is specified for two or more of the parameters above, the
settings are prioritized as follows: IEEE8021X_ENABLE >
VLAN_ENABLE > LLDP_ENABLE. Therefore, if "Y" is specified
for both "VLAN_ENABLE" and "LLDP_ENABLE", the
VLAN-related settings are used.
•
Y (Enable)
•
N (Disable)
N
Enable IEEE802.1X (Page 86)
Integer
Specifies the authentication method used with the IEEE 802.1X
protocol.
Note
•
This setting is available only when "VLAN_ENABLE" is set to
"N".
•
1 (PEAP)
•
0 (EAP-MD5)
0
Authentication Protocol (Page 87)
String
Document Version 2013-03