Default Value
Detection Interval
Description
Value Range
Default Value
4.3.5.2 STUN Server
STUN Server Address
Description
Value Range
Default Value
Configuration File Reference
STUN Server Port
Description
Value Range
Default Value
Configuration File Reference
4.3.6 Static NAPT Settings
This screen allows you to configure the NAPT (Network Address Port Translation) settings. If the unit is
connected behind a router that uses NAT/NAPT to translate between private and global IP addresses, VoIP
Document Version 2013-03
STUN
Specifies the interval, in seconds, to wait between attempts to detect
the global IP address.
0, 10–65535 (0: Disable)
Note
•
When [Detection Method] is set to [SIP], the value "0" disables
detection and a value other than "0" enables detection.
0
Specifies the IP address or FQDN of the STUN server.
Max. 127 characters
Not stored.
STUN_SERV_ADDR (Page 202)
Specifies the port number of the STUN server.
1–65535
3478
STUN_SERV_PORT (Page 202)
4.3.6 Static NAPT Settings
Administrator Guide
91