Conference Server Uri; Inter-Digit Timeout; Timer For Dial Plan; International Call Prefix - Panasonic KX-UT123 Administrator's Manual

4.6.1 Call Control

Conference Server URI

Description
Value Range
Default Value
Configuration File Reference

Inter-digit Timeout

Description
Value Range
Default Value
Configuration File Reference

Timer for Dial Plan

Description
Value Range
Default Value
Configuration File Reference

International Call Prefix

Description
Value Range
Default Value
Configuration File Reference
124 Administrator Guide
Specifies the URI for a conference server, which consists of "sip:", a
user part, the "@" symbol, and a host part, for example,
"sip:conference@example.com".
Note
•
In a SIP URI, the user part ("conference" in the example above)
can contain up to 63 characters, and the host part
("example.com" in the example above) can contain up to 127
characters.
•
Availability depends on your phone system.
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Not stored.
CONFERENCE_SERVER_URI (Page 205)
Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
1–15
5
INTDIGIT_TIM (Page 206)
Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
1–15
5
MACRODIGIT_TIM (Page 206)
Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Max. 8 characters (consisting of 0–9, *, and #)
Not stored.
INTERNATIONAL_ACCESS_CODE (Page 206)
Document Version 2013-03