4.3.3 HTTP Client Settings
Value Range
Default Value
Configuration File Reference
HTTP User Agent
Description
Value Range
Default Value
Configuration File Reference
Authentication ID
Description
Value Range
Default Value
Configuration File Reference
Authentication Password
Description
Value Range
Default Value
Configuration File Reference
76
Administrator Guide
•
HTTP/1.0
•
HTTP/1.1
Note
•
For this unit, it is strongly recommended that you select [HTTP/
1.0]. However, if the HTTP server does not function well with
HTTP/1.0, try changing the setting [HTTP/1.1].
HTTP/1.0
HTTP_VER
Specifies the text string to send as the user agent in the header of
HTTP requests.
Max. 64 characters
Note
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT
Specifies the ID for the User account. If set, this name must be
entered to access the Web user interface at the User access level.
Max. 128 characters
Not stored.
HTTP_AUTH_ID
Specifies the password for the User account. If set, this password
must be entered to access the Web user interface at the User access
level.
Max. 128 characters
Not stored.
HTTP_AUTH_PASS
Document Version: 2017-07