Authentication Id - Panasonic KX-TGP600 Administrator's Manual

Value Range
Default Value
Configuration File Reference

Authentication ID

Description
Value Range
Default Value
Configuration File Reference
Authentication Password
Description
Value Range
Default Value
Configuration File Reference
4.3.3.2 Proxy Server
Enable Proxy
Description
Value Range
Default Value
Configuration File Reference
Document Version 2017-07
Max. 64 characters
Note
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT (Page 227)
Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Max. 128 characters
Not stored.
HTTP_AUTH_ID (Page 228)
Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Max. 128 characters
Not stored.
HTTP_AUTH_PASS (Page 228)
Selects whether to enable or disable the HTTP proxy feature.
•
Yes
•
No
No
HTTP_PROXY_ENABLE (Page 228)
4.3.3 HTTP Client Settings
Administrator Guide 93