5.4.5 HTTP Settings
HTTP_VER
Value Format
Description
Value Range
Default Value
Web User Interface Reference
HTTP_USER_AGENT
Value Format
Description
Value Range
Default Value
Web User Interface Reference
HTTP_SSL_VERIFY
Value Format
Description
200
Administrator Guide
Integer
Specifies which version of the HTTP protocol to use for HTTP
communication.
•
1 (Use HTTP 1.0)
•
0 (Use HTTP 1.1)
Note
•
For this unit, it is strongly recommended that you specify "1" for
this setting. However, if the HTTP server does not function well
with HTTP 1.0, try changing the setting "0".
1
HTTP Version (Page 88)
String
Specifies the text string to send as the user agent in the header of HTTP
requests.
Max. 40 characters
Note
•
An empty string is not allowed.
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP User Agent (Page 88)
Integer
Specifies whether to enable the verification of the root certificate.
Document Version 2013-03