4.3.3 IEEE802.1X Settings (KX-UT248 only)
4.3.3.2 IEEE802.1X Authentication
Authentication Protocol
Description
Value Range
Default Value
Configuration File Reference
Authentication ID
Description
Value Range
Default Value
Configuration File Reference
Authentication Password
Description
Value Range
Default Value
Configuration File Reference
84
Administrator Guide
Specifies the authentication method used with the IEEE 802.1X
protocol.
Note
•
You cannot set this parameter if [Enable VLAN] is set to
[Yes].
•
EAP-MD5
•
PEAP
EAP-MD5
IEEE8021X_AUTH_PRTCL (Page 194)
Specifies the authentication ID required for IEEE 802.1X
authentication.
Note
•
You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Max. 127 characters (except ", &, ', :, <, >, and space)
Not stored.
IEEE8021X_USER_ID (Page 194)
Specifies the authentication password used for IEEE 802.1X
authentication.
Note
•
You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Max. 127 characters (except ", &, ', :, <, >, and space)
Not stored.
IEEE8021X_USER_PASS (Page 194)
Document Version
2012-02