Busy (Phone Number)
Description
Value Range
Default Value
No Answer (Enable Call Forward)
Description
Value Range
Default Value
Document Version 2013-03
Specifies the phone number of the destination to forward calls to when
the line is in use.
Note
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Max. 32 characters
Note
•
You cannot leave this field empty if [Busy (Enable Call
Forward)] is set to [Yes].
Not stored.
Selects whether to forward incoming calls to a specified destination
when a call is not answered after it has rung a specified number of
times.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
•
You can synchronize the Do Not Disturb and Call Forward from
the Web user interface (® see [Synchronize Do Not Disturb
and Call Forward] in 4.6.2.1 Call Control) or through
configuration file programming (® see
"FWD_DND_SYNCHRO_ENABLE_n" in 5.7.1 Call Control
Settings).
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
•
Yes
•
No
No
4.6.2 Call Control [Line 1]–[Line x]
Administrator Guide
133