4.3.3 IEEE802.1X Settings (KX-UT248 only)
Configuration File Reference
4.3.3 IEEE802.1X Settings (KX-UT248 only)
This screen allows you to configure settings relating to the IEEE 802.1X networking protocol.
4.3.3.1 IEEE802.1X Settings
Enable IEEE802.1X
Description
Value Range
Default Value
Configuration File Reference
86
Administrator Guide
VLAN_PRI_PC (Page 197)
Selects whether to use the IEEE 802.1X protocol.
Note
•
You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE8021X".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "IEEE8021X" > "VLAN"
> "LLDP". Therefore, if "Yes" is specified for both "VLAN" and
"LLDP", the VLAN-related settings are used.
•
Yes
•
No
No
IEEE8021X_ENABLE (Page 198)
Document Version 2013-03