4.3.5 IEEE802.1X Settings
Value Range
Default Value
Authentication ID
Description
Value Range
Default Value
Authentication Password
Description
Value Range
Default Value
90
Administrator Guide
•
EAP-MD5
•
EAP-TLS
•
EAP-FAST
•
EAP-PEAP-GTC
•
EAP-PEAP-MSCHAPv2
•
EAP-TTLS-GTC
•
EAP-TTLS-MSCHAPv2
EAP-MD5
Specifies the authentication ID required for IEEE 802.1X
authentication.
Note
•
You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Max. 127 characters (except ", &, ', :, <, >, and space)
Not stored.
Specifies the authentication password used for IEEE 802.1X
authentication.
Note
•
You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Max. 127 characters (except ", &, ', :, <, >, and space)
Not stored.
Document Version 2014-04