5.5.2 Tone Settings
HOLD_TONE_RPT
Value Format
Description
Value Range
Default Value
HOLD_TONE_TIMING
Value Format
Description
Value Range
Default Value
BELL_CORE_PATTERN1_TIMING
Value Format
Description
Value Range
Default Value
BELL_CORE_PATTERN2_TIMING
Value Format
220
Administrator Guide
Integer
Specifies whether the hold tone is repeated.
0–1
–
0: No Repeat
–
1: Repeat
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of the hold tone using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 500 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
500,190,190,190,2890
Comma-separated Integer
Specifies the cadence, in milliseconds, of pattern ID 1, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2...) separated by
commas.
0–5000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
2000,4000
Comma-separated Integer
Document Version 2013-03