5.4.1 IP Settings
Description
Value Range
Default Value
Phone User Interface
Reference
Web User Interface Reference
HOST_NAME
Value Format
Description
Value Range
Default Value
Web User Interface Reference
DHCP_DNS_ENABLE
Value Format
Description
Value Range
Default Value
192
Administrator Guide
Specifies whether to assign the IP address automatically (DHCP) or
manually (static).
Note
•
This setting is available only when "NW_SETTING_ENABLE" is
set to "N".
•
1 (DHCP)
•
0 (Static)
1
Configuring the Network Settings of the Unit (Page 19)
Connection Mode (Page 78)
String
Specifies the host name for the unit to send to the DHCP server.
Note
•
This setting is available only when "CONNECTION_TYPE" is set
to "1".
Max. 63 characters
Note
•
An empty string is not allowed.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
{MODEL}
Host Name (Page 78)
Boolean
Specifies whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
•
This setting is available only when "CONNECTION_TYPE" is set
to "1" and when "NW_SETTING_ENABLE" is set to "N".
•
Y (Use "USER_DNS1_ADDR" or, "USER_DNS1_ADDR" and
"USER_DNS2_ADDR")
•
N (Receive DNS server address automatically)
N
Document Version 2013-03