Annex_G_Stun_Min_Keep_Alive; Udp_Con_Req_Addr_Notify_Limit; Network Settings; Ip Settings - Panasonic KX-UT123 Administrator's Manual

Description
Value Range
Default Value

ANNEX_G_STUN_MIN_KEEP_ALIVE

Value Format
Description
Value Range
Default Value

UDP_CON_REQ_ADDR_NOTIFY_LIMIT

Value Format
Description
Value Range
Default Value

5.4 Network Settings

5.4.1 IP Settings

CONNECTION_TYPE

Value Format
Document Version 2013-03
Specifies the maximum period, in seconds, that STUN Binding
Requests must be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This applies specifically to Binding Requests
sent from the UDP Connection Request address and port.
Note
•
This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
1–3600
300
Integer
Specifies the minimum period, in seconds, that STUN Binding
Requests can be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This limit applies only to Binding Requests sent
from the UDP Connection Request address and port, and only those
that do not contain the BINDING-CHANGE attribute.
Note
•
This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
1–3600
30
Integer
Specifies the minimum time, in seconds, between Active Notifications
resulting from changes to the "UDPConnectionRequestAddress" (if
Active Notification is enabled).
0–65535
0
Integer
5.4.1 IP Settings
Administrator Guide 191