Cw_Tone1_Rpt; Cw_Tone1_Timing; Hold_Tone_Frq; Hold_Tone_Gain - Panasonic KX-UT123 Administrator's Manual

Value Range
Default Value

CW_TONE1_RPT

Value Format
Description
Value Range
Default Value

CW_TONE1_TIMING

Value Format
Description
Value Range
Default Value

HOLD_TONE_FRQ

Value Format
Description
Value Range
Default Value

HOLD_TONE_GAIN

Value Format
Description
Value Range
Default Value
Document Version 2013-03
-24–6
0
Integer
Specifies whether call waiting tone 1 is repeated.
0–1
–
0: No Repeat
–
1: Repeat
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of call waiting tone 1 using up to
10 whole numbers (on 1, off 1, on 2, off 2...) separated by commas.
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
120,120,120,120,120,14400
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
Integer
Specifies the gain, in decibels, of the hold tone.
-24–6
0
5.5.2 Tone Settings
Administrator Guide 219