Intended Application Uses; Site Selection - QUANTA Stratos S810-X52L User Manual

S I
AFETY NFORMATION
Please recycle battery.
The rail racks are designed to carry only the weight
of the server system. Do not use rail-mounted
equipment as a workspace. Do not place additional
load onto any rail-mounted equipment.
Indicates two people are required to safely handle
the system.
Restricted Access Location: The server is
intended for installation only in a Server Room or
Computer Room where both these conditions
apply:
access can only be gained by SERVICE PER-

SONS or by USERS who have been instructed
about the reasons for the restrictions applied to
the location and about any precautions that shall
be taken; and
access is through the use of a TOOL or lock and

key, or other means of security, and is controlled
by the authority responsible for the location.

Intended Application Uses

This product was evaluated as Information Technology Equip-
ment (ITE), which may be inst a lled in offices, schools, computer
rooms, and similar commercial type locations. The suitability of
this product for other product categories and environments
(such as medical, industrial, residential, alarm systems, and
test equipment), other than an ITE application, may require fur-
ther evaluation.

Site Selection

The system is designed to operate in a typical office environ-
ment. Choose a site that is:
Clean, dry, and free of airborne particles (other than nor-

mal room dust).
Well-ventilated and away from sources of heat including

direct sunlight and radiators.
Away from sources of vibration or physical shock.

Isolated from strong electromagnetic fields produced by

electrical devices.
In regions that are susceptible to electrical storms, we rec-

ommend you plug your system into a surge suppressor
and disconnect telecommunication lines to your modem
during an electrical storm.
Provided with a properly grounded wall outlet.

Provided with sufficient space to access the power supply

cord(s), because they serve as the product's main power
disconnect.
Provided with either two independent AC power sources

or two independent phases from a s single source.
3-2
I A U
NTENDED PPLICATION SES