Removing A Sas 6Gb Mezzanine Card - QUANTA STRATOS S210 Series S210-X12RS Technical Manual

I H
NSTALLING ARDWARE
Removing a SAS 6Gb Mezzanine
Card
Prerequisite: Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
Remove the PCIe riser assembly. See Removing the
PCIe Riser Assembly on page 2-25.
Remove memory modules:
CPU 0 C-A DIMM A0 ~ CPU 0 C-A DIMM A2,
CPU 0 C-B DIMM B0 ~ CPU 0 C-B DIMM B2,
CPU 1 C-G DIMM G0 ~ CPU 1 C-G DIMM G2,
CPU 1 C-H DIMM H0 ~ CPU 0 C-H DIMM H2,
See Memory Population Rules on page 2-22 for loca-
tion. See Removing a Memory Module on page 2-20.
1. Disconnect the SAS cables from the connectors on the
expander board.
SAS
Cables
Expander
Board
Connectors
Figure 2-54. 6G SAS Cables and Expander Board
2. Remove the SAS cables from along the side of the chas-
sis.
2-37
R SAS 6G M
EMOVING A B EZZANINE
Connectors
C
ARD