Installing The Rack Brackets; Preparing For The Installation - QUANTA STRATOS S210 Series S210-X12RS Technical Manual

R K A
AIL IT SSEMBLY
6.1 Rail Kit Assembly

Installing the Rack Brackets

CAUTION!
!
B
EFORE REMOVING THE SERVER COVER
U AC
NPLUG THE POWER CORD
LAN .
ALL LINES
When the server is to be installed into a rack, it is necessary to
install two rack mount brackets onto the server chassis prior to
installing the server into the rack. Follow the procedures below
to install the rack mount brackets onto the server.
, .
DISCONNECT ALL POWER
; ,
DISCONNECT ALL PERIPHERIALS AND

Preparing for the Installation

Review all the tasks required to install and configure the

system
Review the electrical requirements and power supply input

voltage information
Examine the system's shipping kit contents and assemble

the required tools for installation
Review ESD requirements and take safety precautions

Before installing the system into a rack, install any optional

components into the system
Stabilize the rack before installing the system, if necessary

WARNING!
!
Use caution when removing the inner rail from the rail kit
assembly. The rails can slide out and cause personal injury or
damage to the server.
6-1
R K A
AIL IT SSEMBLY