Virtual Media - QUANTA QuantaGrid Series User Manual

BMC
18. To delete an existing user, select the user from the list and click Delete User.
Note:
There is a list of reserved users which cannot be added / modified as BMC users. Please Refer
"MEGARAC SP-X Platform Porting Guide" section "Changing the Configurations in PMC File->
User Configurations in PMC File" for the list of reserved users.

Virtual Media

In MegaRAC GUI, this page to configure Virtual Media device settings. If you change the
configuration of the virtual media in this page, it shows the appropriate device in the
JViewer Vmedia dialog. For example, if you select two floppy devices in Configure Virtual
Media page, then in JViewer > Vmedia, you can view two floppy device panel.
To open Virtual Media page, click Configuration > Virtual Media from the main menu. A
sample screenshot of User Management Page is shown in the screenshot below.
The following fields are displayed in this page.
Table 27: Configure Virtual Media Devices
I
TEM
Floppy devices
CD/DVD devices
Hard disk devices
Local Media Support
Save
Reset
Procedure:
1. Select the number of Floppy devices, CD/DVD devices and Hard disk devices from
the dropdown list.
Figure 3-43. Configure Virtual Media Devices
The number of floppy devices that support for Virtual Media redirec-
tion.
The number of CD/DVD devices that support for Virtual Media redirec-
tion.
The number of hard disk devices that support for Virtual Media redirec-
tion.
To enable or disable the local media support for Virtual Media redirec-
tion.
To save the configured settings.
To reset the previously-saved values.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-59