Auto Paper Selection/Auto Drawer Switching - Canon ImageRunner 2545i Reference Manual

Auto Paper Selection/Auto Drawer Switching

The machine is equipped with the Automatic Paper Selection (APS) and Automatic
Drawer Switching (ADS) functions.
• APS: The machine automatically selects the appropriate paper size (paper
source) based on the size of the page or image to be printed. In copying, for
example, the paper source is automatically selected based on the original's size
and the copy ratio setting.
• ADS: If a paper source runs out of paper during a continuous print job, the
machine automatically selects another paper source loaded with the same size
paper, and begins feeding paper from that paper source.
3
The Drawer Eligibility For APS/ADS setting defines which paper source (such as
the stack bypass and Paper Drawer 1/2/3/4) is used for a specific purpose (such as
copying, printing, receiving (RX), and other types of jobs). The setting can be made
independently for all types of jobs (except sending (TX) jobs), and is especially
useful when you want to use different paper sources for different purposes.
IMPORTANT
The number of available paper sources may vary depending on the machine
configuration.
NOTE
The default settings are 'Off' for the stack bypass and 'On' for the paper drawers.
1
Press
For help, see steps 1 and 2 in "Initial Function at Power ON," on p. 3-2.
2
3-8
Specifying Common Settings
(Additional Functions) ➞ [Common Settings].
Press [ ] or [ ] until
[Drawer Eligibility For APS/ADS]
appears ➞ press
[Drawer Eligibility For APS/ADS].