Canon ImageRunner 2545i Reference Manual page 187

# 0752
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
Cause 4
Remedy
6
# 0753
Cause
Remedy
# 0755
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
6-20
Self-diagnostic Display
The SMTP server name and e-mail address are incorrect.
Check that SMTP Server and E-mail Address in E-mail/I-Fax are set correctly.
(See Chapter 3, "Setting up the Machine for Your Network Environment," in the
System Settings Guide.)
The domain name is incorrect.
Check that Domain Name in DNS Host Name/Domain Name Settings is set
correctly. (See Chapter 3, "Setting up the Machine for Your Network
Environment," in the System Settings Guide.)
The SMTP server is not functioning.
Check that the SMTP server is operating properly.
The network is down.
Check the network status.
A TCP/IP error occurred while sending an e-mail. (Socket, Select error, etc.)
Check that the network cable is properly connected between the machine and
your computer. If the machine still does not operate normally, turn the main
power OFF and then back ON.
Jobs cannot be sent because TCP/IP is not functioning correctly.
Check that TCP/IP Settings in Network Settings is set correctly. (See Chapter 2,
"Connecting the Machine to a TCP/IP Network," in the System Settings Guide.)
The IP address is not set.
Check that TCP/IP Settings in Network Settings. (See Chapter 2, "Connecting
the Machine to a TCP/IP Network," in the System Settings Guide.)
When the machine was turned ON, an IP address was not assigned to the
machine by the DHCP, RARP, or BOOTP server.
After the machine is turned ON, communication with a network will not start until
the time specified in Startup Time Settings in Network Settings elapses. (See
Chapter 7, "Other System Settings," in the System Settings Guide.) Wait a few
moments, and then try sending again.