Inner 2 Way Tray-G1
If you attach the Inner 2 Way Tray-G1 to the machine, prints can be delivered to
both the main tray and the Inner 2 Way Tray-G1.
IMPORTANT
• To use the Inner 2 Way Tray-G1 with the imageRUNNER 2530/2525/2520i/2520, the
optional 2 Way Unit-B1 is also required.
• The Inner 2 Way Tray-G1 cannot be installed with the optional Inner Finisher-B1.
• The Inner 2 Way Tray-G1 must be enabled prior to use. (See Chapter 7, "Other
System Settings," in the System Settings Guide.)
4
• If the Inner 2 Way Tray-G1 is attached, you must enable the functions for Tray B so that
the machine can deliver the prints to it. (See "Tray Designation," on p. 3-14.)
a Main Output Tray (Tray A)
Prints are output to this tray.
4-18
Inner 2 Way Tray-G1
b Inner 2 Way Tray (Tray B)
Prints are output to this tray.