Canon ImageRunner 2545i Reference Manual page 176

Check the TCP/IP.
Cause 1 The machine's TCP/IP is not operating.
Remedy Check the IP address settings (IP address, DHCP, RARP, BOOTP). (See
Chapter 2, "Connecting the Machine to a TCP/IP Network," in the System
Settings Guide.)
Cause 2 The machine and the network cable are not properly connected.
Remedy Check that the network cable is properly connected between the machine and
the network.
Check the user name and password or check settings.
Cause 1 The user name, password, or server name for access to Authorized Send is
incorrect.
Remedy Make sure that the specified user name, password, and server name are
correct.
Cause 2 The user attribute name, administrator's ID, or password for access to
Authorized Send is incorrect.
Remedy Check that <Attribute of User Name>, <User Name>, and <Password> on the
LDAP Authentication Server Settings page are set correctly. (See Chapter 4,
"Customizing Settings," in the Remote UI Guide.)
Check your document.
Cause Paper or originals are jammed.
Remedy Remove the jammed paper or originals. (See "Clearing Paper Jams," on
p. 6-27.)
Load paper.
Cause 1 The machine has run out of paper.
Remedy Load paper. (See "Loading Paper," on p. 5-3.)
Cause 2 The paper drawer is not fully inserted.
Remedy Insert the paper drawer as far as it will go.
Self-diagnostic Display
6
6-9