Canon ImageRunner 2545i Reference Manual page 228

2
3
[Off]:
[MODE1]:
[MODE2]:
[MODE3]:
The selected mode is set.
4
Press (Reset) to return to the top screen.
Press [
[Special Mode F] appears ➞
press [Special Mode F].
Press [Off], [MODE1], [MODE2],
or [MODE3] to select the desired
setting ➞ press [OK].
Press to disable the mode.
Press to prevent toner from smudging or bleeding on prints.
Press to prevent toner from smudging or bleeding on prints more
effectively than [MODE1]. Use this mode if the problem persists
after [MODE1] was selected.
Press to prevent toner from smudging or bleeding on prints more
effectively than [MODE1] or [MODE2]. Use this mode if the
problem persists after [MODE2] was selected.
] or [ ] until
Adjusting the Machine Settings
6
6-61