Controlling Volume Of The Audible Tones (Optional) - Canon ImageRunner 2545i Reference Manual
Hide thumbs
Also See for ImageRunner 2545i:
- Sending and facsimile manual (321 pages) ,
- System settings manual (314 pages) ,
- Printer manual (148 pages)
Table of Contents
Advertisement
2
Controlling Volume of the Audible Tones (Optional)
If the machine is configured as a traditional fax machine, you can adjust the volume
of the audible tones.
NOTE
The volume settings can be adjusted only when the optional Super G3 Fax Board-AG1
is attached to the machine.
1
Press
2
Specify the desired tone settings.
● To adjust the monitor (dial tone) volume:
(Volume Control).
Press [On] or [Off] to enable or
disable each of the desired tones
➞ press [Done].
The selected mode is set.
❑
Press [
] (Decrease) or
[
] (Increase) to select the desired
volume from four levels (0 - 3).
❑
Press [Done].
The selected mode is set.
Volume Control
2
2-31
Advertisement
Table of Contents
