Canon ImageRunner 2545i Reference Manual page 68

3
4
<Select Initial Function>
Press [Copy], [Send](or [Fax]), or [Scan/Print] to select the initial function.
IMPORTANT
• To use the Send function with the imageRUNNER 2545/2535/2530/2525/2520,
the function must be activated with the optional Color Send Kit-Y1.
• [Fax] is displayed only when both of the following conditions are met:
- The optional Super G3 Fax Board-AG1 is attached.
- The Send function is not activated.
<Set System Monitor Screen as Initial Function>
[On]: Press to set the System Monitor screen as the default top screen.
[Off]: Press to set the top screen of the selected function (Copy, Send, or
Scan/Print) as the default top screen.
<Set [Device] as Default for System Monitor Screen>
[On]: Press to set the Device status screen as the default screen of the
System Monitor. (The Device status screen is displayed when you
press [System Monitor].)
[Off]: Press to set the Copy status screen as the default screen of the
System Monitor.
The selected mode is set.
Press [Initial Function].
Select the settings for the default
top screen ➞ press [OK].
The screen shot on the left may differ from
the actual display depending on the
machine configuration.
Specifying Common Settings
3
3-3