Canon ImageRunner 2545i Reference Manual page 122

You can use the 64 to 128 g/m
that can be stapled when you are using the 80 g/m
• A4: 50 sheets
• A4R and A3: 30 sheets
IMPORTANT
• The Staple mode is available for the following paper sizes: A4, A4R, and A3.
• You cannot staple envelopes, transparencies, or labels.
• Double stapling is available for the following paper types: Plain, Recycled, or Color.
• Do not pull prints out of the output area while they are being stapled. Remove the
prints after they are output to the output trays.
NOTE
If the message <Load staples.> is displayed on the touch panel display, the machine is
out of staples. Replace the staple cartridge with a new one. (See "Replacing the
Staple Cartridge," on p. 5-27.)
■ Offset Mode
The Offset mode can be selected in combination with the Collate or Group mode.
Each set of prints is output with the same orientation, but staggered back and
forth in alternating layers.
IMPORTANT
The Offset mode is available for the following paper sizes: A4, A4R, and A3.
2 paper for stapling. The maximum number of sheets
Originals
1
2
3
4
2
paper is as follows:
Copies
Inner Finisher-B1
4
4-17