Other Problems - Canon ImageRunner 2545i Reference Manual

The backside of the prints is smudged.
Cause The transfer roller is dirty.
Remedy Clean the transfer roller. (See "Transfer Roller Cleaning," on p. 5-36.)
Toner smudges or bleeds easily on prints.
Cause In a high-humidity environment, excessive moisture inside the machine may
cause toner to smudge or bleed on prints.
Remedy Use Special Mode F. This mode prevents excessive moisture inside the
machine from adversely affecting prints. (See "Preventing Toner from Smudging
or Bleeding on Prints," on p. 6-60.)

Other Problems

Staples are jammed.
Cause Staples are jammed in the finisher.
Remedy Remove the jammed staples from the finisher. (See "Clearing Staple Jams," on
p. 6-46.)
Prints are not delivered to the additional paper output tray.
Cause 1 None of the functions have been selected for Tray B, so no prints are delivered
to it.
Remedy Select the desired functions for Tray B. The prints for the selected functions are
delivered to the additional paper output tray. (See "Tray Designation," on
p. 3-14.)
Cause 2 The optional Inner 2 Way Tray is not enabled.
Remedy Enable the optional Inner 2 Way Tray. (See Chapter 7, "Other System Settings,"
in the System Settings Guide.) After the Inner 2 Way Tray is enabled, select the
desired functions for Tray B. (See "Tray Designation," on p. 3-14.)
Identifying and Isolating Problems
6
6-5