Canon ImageRunner 2545i Reference Manual page 83

4
Select the desired paper size/type.
● If you want to select a standard paper size:
3
● If you want to select a nonstandard paper size:
3-18
Specifying Common Settings
NOTE
• [Transparency] can be selected only when [A4] is selected as the paper size.
• If [Transparency] or [Labels] is selected, you cannot select Rotate, Offset, or
Staple as the Finishing mode.
❑
Select the desired paper size ➞ press
[Next].
IMPORTANT
Make sure that the paper size setting
is correct. If the paper size loaded on
the stack bypass and the paper size
setting do not match, a paper jam may
occur.
NOTE
To select from North American paper
sizes, press [Inch-size].
❑
Select the desired paper type ➞ press
[OK].
The selected mode is set.
IMPORTANT
Make sure that the paper type setting
is correct. An incorrect paper type
setting may adversely affect the image
quality, damage the fixing unit, and
cause paper jams.
❑
Press [Irreg. Size].