Self-Diagnostic Display; Error Messages - Canon ImageRunner 2545i Reference Manual

Self-diagnostic Display

The machine displays simple messages and codes that help you understand what
is occurring in the machine. Use these messages and codes to identify the actions
you need to take to solve problems, when necessary.

Error Messages

If the machine displays an error message, follow the instructions on the touch panel
display.
A4 Load Paper.
Cause The optimum paper size selected by the Automatic Paper Selection mode is not
available in the machine.
Remedy 1 Load the indicated paper size into the machine. (See "Paper Drawers," on
p. 5-2.) If you press
with the currently selected paper size.
Remedy 2 If the message continues to be displayed even after the indicated paper size is
loaded, enable the paper drawer for the desired functions. (See "Auto Paper
Selection/Auto Drawer Switching," on p. 3-8.)
Cannot complete searching due to timeout. Check the settings.
Cause 1 The machine could not search for destinations within the specified time.
Remedy Increase the time setting for Search Timeout in Register LDAP Server. (See
Chapter 3, "Setting up the Machine for Your Network Environment," in the
System Settings Guide.)
Cause 2 The machine could not authenticate a user against an authentication server and
retrieve attributes about the user from the server within the specified time.
Remedy Increase the time setting for <Timeout Settings> on the Send Function
Authentication Settings page. (See Chapter 4, "Customizing Settings," in the
Remote UI Guide.)
Cause 3 An error occurred on the LDAP server side.
Remedy Check that the LDAP server is functioning normally.
(Start) while this message is displayed, prints are made

Self-diagnostic Display

6
6-7