● If you want to select an envelope type:
5
❑
Press [Envelope].
❑
Select the envelope type ➞ press [OK].
IMPORTANT
Make sure that the envelope type
setting is correct. If the envelopes
loaded on the stack bypass and the
envelope type setting do not match, a
paper jam may occur.
❑
Press [OK].
Press [Done].
The paper size and type you specified are
displayed on the key for the stack bypass.
NOTE
To change the paper size and type
settings, remove the paper from the
stack bypass, again load the paper,
and reset the settings from step 4.
Loading Paper in the Stack Bypass
2
2-29