Setting A Paper Drawer For Auto Paper Selection/Auto Drawer Switching - Canon imageRUNNER 3300 Reference Manual

Setting a Paper Drawer for Auto Paper Selection/Auto
Drawer Switching
You can set the paper drawers to be used for Automatic Paper Selection and Auto Drawer
Switching. This setting can be made independently for Copy, Mail Box, and other functions.
This function is useful when different paper drawers are to be used for different purposes.
NOTE
•
Paper drawers set to "On" are used for the following functions:
- Auto Paper Selection (APS): The machine automatically selects the appropriate paper size (paper
drawer) for the size of the original and the set ratio (when making a copy), or of the image (when
receiving a fax).
- Auto Drawer Switching (ADS): If a paper drawer runs out of paper during a continuous printing job,
the machine automatically selects another paper drawer with the same paper size and begins
feeding paper from that paper drawer.
•
The default settings are "Off" for the stack bypass and "On" for the paper drawers (1 to 4).
1
Call up the desired screen as follows:
(Additional Functions)
2
Select "Copy," "Mail Box," "Printer," or "Other ("Fax")."
When only the Printer Kit is
attached
"Printer" can only be set when the Printer Kit is attached.
"Other" is displayed when the FAX Board is not attached, and sets the paper drawers to be
used for report printing.
"Fax" can only be set when the FAX Board is attached. And, when the FAX Board is
attached, set the paper drawers to be used for report by pressing "Fax."
Setting Specifications That Are Common to Each Function (Common Settings)
Drawer Eligibility For APS/ADS
When the Printer Kit and the FAX
Board are attached
3
3-13