Standard Paper for the Stack Bypass
You can set the default paper size and type for the stack bypass. Use this setting if
you frequently load the same paper size and type in the stack bypass.
NOTE
• To feed paper from the stack bypass with the APS/ADS mode, the stack bypass must
be enabled for the desired job types. (See "Auto Paper Selection/Auto Drawer
Switching," on p. 3-8.)
• For more information on the paper sizes/types available for the machine, see
"Available Paper Stock," on p. 7-8.
• The default setting is 'Off'.
1
Press
For help, see steps 1 and 2 in "Initial Function at Power ON," on p. 3-2.
2
3
(Additional Functions) ➞ [Common Settings].
Press [
] or [
] until
[Stack Bypass
Standard Settings] appears ➞
press [Stack Bypass
Standard Settings].
Press [On] ➞ [Store].
[Store] is activated only when [On] is
pressed.
Specifying Common Settings
3
3-17