Canon ImageRunner 2545i Reference Manual page 74

3
[Copy]: Press to select the paper sources used for the copy jobs.
[Printer]: Press to select the paper sources used for the print jobs.
[Receive] Press to select the paper sources used for the receiving (RX) jobs
(or [Fax]): (printing received I-faxes or traditional faxes).
[Other]: Press to select the paper sources used for printing reports, such as
the Address Book List, User's Data List, etc.
IMPORTANT
• [Receive] is displayed only when the Send function (optional for the imageRUNNER
2545/2535/2530/2525/2520) is activated.
• [Fax] is displayed only when both of the following conditions are met:
- The optional Super G3 Fax Board-AG1 is attached.
- The Send function is not activated.
4
[On]: Press to enable the paper source for the selected job type.
[Off]: Press to disable the paper source for the selected job type.
NOTE
You cannot disable all of the paper drawers at the same time. At least one of the paper
drawers must be enabled.
Press [Copy], [Printer],
[Receive](or [Fax]), or [Other].
The screen shot on the left may differ from
the actual display depending on the
machine configuration.
Press [On] or [Off] for the stack
bypass and the paper drawers ➞
press [OK].
The available paper sources can be
identified by the following icons:
: Stack Bypass
: Drawer 1
: Drawer 2 (optional for the
imageRUNNER 2520i/2520)
: Drawer 3 (optional)
: Drawer 4 (optional)
Specifying Common Settings
3
3-9