Specifying A5R/Stmtr Paper - Canon ImageRunner 2545i Reference Manual

Specifying A5R/STMTR Paper

Specify A5R or STMTR when paper of these sizes is loaded in the paper drawers.
NOTE
The default setting is 'A5R'.
1
Press
For help, see steps 1 and 2 in "Initial Function at Power ON," on p. 3-2.
2
3
4
Open the paper drawer and then close it.
The selected mode is set.
5
Press
(Additional Functions) ➞ [Common Settings].
(Reset) to return to the top screen.
Press [ ] or [ ] until
[A5R/STMTR Paper Selection]
appears ➞ press [A5R/STMTR
Paper Selection].
Press [A5R] or [STMTR] for each
paper source to select the
desired paper size ➞ press [OK].
The available paper sources can be
identified by the following icons:
: Drawer 1
: Drawer 2 (optional for the
imageRUNNER 2520i/2520)
: Drawer 3 (optional)
: Drawer 4 (optional)
Specifying Common Settings
3
3-31