Canon ImageRunner 2545i Reference Manual page 81

3
[Copy]:
3
[Memory]:
[Printer]:
[Receive](or [Fax]): Press to set the tray to handle received I-fax/fax documents.
[Other]:
The selected mode is set.
IMPORTANT
• [Memory] is displayed only when the Use Media Print setting is set to 'On'. (See
Chapter 7, "Other System Settings," in the System Settings Guide.)
• [Receive] is displayed only when the Send function (optional for the imageRUNNER
2545/2535/2530/2525/2520) is activated.
• [Fax] is displayed only when both of the following conditions are met:
- The optional Super G3 Fax Board-AG1 is attached.
- The Send function is not activated.
4
Press
3-16
Specifying Common Settings
Press to set the tray to handle copy jobs.
Press to set the tray to handle prints from the USB memory media
device.
Press to set the tray to handle prints via the printer driver.
Press to set the tray to handle report prints.
(Reset) to return to the top screen.
Press [Copy], [Memory],
[Printer], [Receive](or [Fax]), or
[Other] to select the desired job
types for each output tray ➞
press [OK].
The selected job types are highlighted.
The screen shot on the left may differ from
the actual display depending on the
machine configuration.