Inner Finisher-B1 - Canon ImageRunner 2545i Reference Manual

Inner Finisher-B1

With the Inner Finisher-B1 attached to the machine, you can make copies in sets
arranged in paper order (Collate) or in groups of each page (Group) as well as
staple copies (Staple). The finisher also enables you to combine the Collate mode
or Group mode with the Offset mode. (See "Finishing Modes," on p. 4-14.)
If the optional Inner Finisher Additional Tray-B1 is attached to the Inner Finisher-B1,
prints can be delivered to two different locations.
IMPORTANT
• To use the finisher with the imageRUNNER 2530/2525/2520i/2520, the optional 2 Way
Unit-B1 is also required.
• The Inner Finisher-B1 cannot be installed with the optional Inner 2 Way Tray-G1.
• If the Inner Finisher Additional Tray-B1 is attached, you must enable the functions for
Tray B so that the machine can deliver the prints to it. (See "Tray Designation," on
p. 3-14.)
a Output Tray
Prints are output to this tray.
b Auxiliary Tray
If you are printing on large size paper, such as
A3, pull out the auxiliary tray.
c Inner Finisher Additional Tray-B1
This option can be attached to the finisher to
provide an additional paper output tray.
d Front Cover of the Inner Finisher-B1
Open this cover to replace the staple cartridge in
the staple case, or to clear a staple jam. (See
"Replacing the Staple Cartridge," on p. 5-27 and
"Clearing Staple Jams," on p. 6-46.)

Inner Finisher-B1

4
4-13