3
Select [On] or [Off] © press [OK].
The selected mode is set.
4
Press [Done] repeatedly until the Basic Features screen
appears.
Auto Paper Selection/Auto Drawer Switching
You can set which paper sources can be used for Automatic Paper Selection and
Auto Drawer Switching. This setting can be made independently for all the different
functions of the machine, and is especially useful when you want to use different
paper sources for different purposes.
NOTE
•
Paper sources set to 'On' are used for the following functions:
- APS (Auto Paper Selection): The machine automatically selects the appropriate paper
size (paper source) based on the original's size and copy ratio settings (when making a
copy), or the set ratio of the image (when receiving a fax).
- ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous
print job, the machine automatically selects another paper source with the same paper
size, and begins feeding paper from that paper source.
•
The default settings are 'Off' for the stack bypass, and 'On' for the other paper sources.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-20.
(Additional Functions) © [Common Settings].
Specifying Common Settings
4
4-33