Canon ImageRunner 2545i Reference Manual page 184

# 0037
Cause Documents could not be received because there is insufficient memory
available.
Remedy Delete unwanted documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 6, "Checking/Changing
the Status of Documents in Memory," in the Sending and Facsimile Guide.)
# 0059
Cause Your transmission was canceled because the number you dialed was different
from the number registered on the other party's fax machine.
Remedy Check to see that the correct fax number is registered on the other party's fax
machine.
# 0099
Cause 1 A job was canceled during transmission to a USB memory media device.
Remedy Try sending again if necessary.
Cause 2 A secured print job was automatically canceled after the timeout period
elapsed.
Remedy Try printing again if necessary. For instructions on how to change the timeout
period, see Chapter 7, "Other System Settings," in the System Settings Guide.
# 0401
Cause The USB memory media device is full or the maximum number of files that can
be stored in the root directory (the top level of the directory tree in the USB
memory media device) has been reached.
Remedy Delete unnecessary files in the USB memory media device or organize the files
in the root directory by moving existing files to a newly created folder.
# 0403
Cause The job failed because a file with the same name already exists. Generally, if a
file with the same name exists, a number ranging from 1 to 999 is added to the
tail of the name to prevent naming conflicts. However, this error occurred
because a file with the same number added to its file name already exists.
Remedy Rename the file, and then write the data again.
Self-diagnostic Display
6
6-17