Entering Values In Inches - Canon ImageRunner 2545i Reference Manual

Entering Values in Inches

The Inch Entry mode enables you to select either inch or millimeter as the unit of
measurement. In this mode, the key for converting values from millimeters to inches
(or vice versa) is displayed on the various numeric entry screens.
NOTE
The default setting is 'Off'.
1
Press
For help, see steps 1 and 2 in "Initial Function at Power ON," on p. 3-2.
2
3
4
Press
(Additional Functions) ➞ [Common Settings].
(Reset) to return to the top screen.
Press [ ] or [ ] until
[Inch Entry] appears ➞ press
[Inch Entry].
Press [On] or [Off] ➞ press [OK].
[On]:
Press to enable the Inch Entry mode.
[Off]:
Press to disable the Inch Entry mode.
The selected mode is set.
Specifying Common Settings
3
3-7